--- title: "Ping Testing on Web Tests and Alerts That Trigger Debug Options" slug: "ping-testing-on-web-tests-and-alerts-that-trigger-debug-options-1" updated: 2023-01-06T15:49:07Z published: 2023-01-06T15:49:07Z canonical: "docs.catchpoint.com/ping-testing-on-web-tests-and-alerts-that-trigger-debug-options-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.catchpoint.com/llms.txt > Use this file to discover all available pages before exploring further. # Ping Testing on Web Tests and Alerts That Trigger Debug Options Catchpoint Web Tests allow you to trigger debug options based on Ping alerts, if **Additional Monitor: Ping (ICMP)** is enabled in the **Advanced Settings**. A traceroute will be triggered if the ping alert thresholds have been met. In order to set this debug option, follow the steps below : 1. Edit the properties of the test, folder, or product. 2. If needed, select **Override** for the **Advanced Settings** section, then click **Add Advanced Settings** 3. Select **Debug Primary Host On Failure**, **Debug Referenced Hosts on Failure**, and **Additional Monitor** then click **Apply**. 4. Make sure the **Additional Monitor** selection is **Ping (ICMP)**. 5. If needed, select **Override** for the **Alerts** section and add desired **Recipients** and **Subject**, then click **Add Alert**. 6. Under **All Alerts > Ping**, select **Ping RTT (Round Trip Time)** 7. Under **Trigger**, select **Specific Value** 8. Put in the number of milliseconds for the **warning** and **critical** thresholds. 9. Under **Conditions**, select **Runs**. 10. Type in either the number of runs or percentage of runs that must exceed a threshold in to trigger an alert. 11. Click **Apply** to save the alert. Completing these steps will present a traceroute on the test whenever the time to complete the Ping test passes the warning time threshold.